GIGABYTE 技嘉
2U GPU 商用監控錄影伺服器
R281-3C2
• 最大支援至 2 x GPU 雙插卡槽
• NVIDIA® 驗證 GPU 平台; 支援 NVIDIA® Tesla®
• 第二代 Gen. Intel® Xeon® Scalable 處理器
• 6通道 RDIMM/LRDIMM DDR4, 24 x DIMMs
• 支援Intel® Optane™ DC 持久記憶
• Dual 1Gb/s LAN 埠(Intel® I350-AM2)
• 1 x 專用管理埠
• 12 x 3.5" 和 2 x 2.5" SATAIII支援熱插拔 HDD/SSD bays
• 8 x PCIe Gen3 擴充插槽
• 2 x OCP Gen3 x16 夾層槽
• Aspeed® AST2500遠端管理控制器
• Dual 1200W 80 PLUS Platinum redundant power supply
• NVIDIA® 驗證 GPU 平台; 支援 NVIDIA® Tesla®
• 第二代 Gen. Intel® Xeon® Scalable 處理器
• 6通道 RDIMM/LRDIMM DDR4, 24 x DIMMs
• 支援Intel® Optane™ DC 持久記憶
• Dual 1Gb/s LAN 埠(Intel® I350-AM2)
• 1 x 專用管理埠
• 12 x 3.5" 和 2 x 2.5" SATAIII支援熱插拔 HDD/SSD bays
• 8 x PCIe Gen3 擴充插槽
• 2 x OCP Gen3 x16 夾層槽
• Aspeed® AST2500遠端管理控制器
• Dual 1200W 80 PLUS Platinum redundant power supply
R281-3C2規格
| 規格 | |
| Dimensions | 2U |
| (WxHxD) | 438 x 87.5 x 730 |
| Motherboard | MR91-FS0 |
| CPU | 2nd Generation Intel® Xeon® Scalable Processors Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor CPU TDP up to 205W NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable |
| Socket | 2 x LGA 3647, Socket P |
| Chipset | Intel® C621 Express Chipset |
| Memory | 24 x DIMM slots DDR4 memory supported only 6-channel memory per processor architecture RDIMM modules up to 64GB supported LRDIMM modules up to 128GB supported Supports Intel® Optane™ DC Persistent Memory (DCPMM) 1.2V modules: 2933(1DPC)/2666/2400/2133 MHz NOTE: 1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only 2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only 3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C 4. To enquire about installing a greater number of DCPMM, please consult with your GIGABYTE technical or sales representative |
| LAN | 2 x 1Gb/s BASE-T LAN ports (Intel® I350-AM2) 1 x 10/100/1000 management LAN |
| Video | Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp, DDR4 SDRAM |
| Storage | Front side: 12 x 3.5" or 2.5"SATA/SAS hot-swap HDD/SSD bays Rear side: 2 x 2.5" SATA/SAS hot-swap HDD/SSD bays 12 x SATA ports by default setting SAS card is required for SAS devices support |
| SATA | 2 x 7-pin SATA III 6Gb/s with SATA DOM supported By using pin_8 or external cable for power function |
| SAS | Supported via add-on SAS Card |
| RAID | Intel® SATA RAID 0/1/10/5 |
| Expansion Slots | Riser Card CRS2131: |
| 1 x PCIe x16 slot (Gen3 x16 or x8), FHFL 1 x PCIe x8 slots (Gen3 x0 or x8), FHFL 1 x PCIe x8 slots (Gen3 x8), FHHL |
|
| Riser Card CRS2132: | |
| 1 x PCIe x16 slot (Gen3 x16 or x8), FHFL 1 x PCIe x8 slots (Gen3 x0 or x8), FHFL 1 x PCIe x8 slots (Gen3 x8), FHHL |
|
| Riser Card CRS2124: | |
| 1 x PCIe x8 slots (Gen3 x0 or x8), LPHL 1 x PCIe x16 slot (Gen3 x16 or x8), LPHL 2 x OCP mezzanine slots - PCIe Gen3 x16, Type1, P1, P2, P3, P4, K2, K3 |
|
| Internal I/O | 2 x Power supply connectors, 4 x SlimSAS connectors, 2 x SATA 7-pin connectors, 2 x CPU fan headers, 1 x USB 3.0 header, 1 x TPM header, 1 x VROC connector, 1 x Front panel header, 1 x HDD back plane board header, 1 x IPMB connector, 1 x Clear CMOS jumper, 1 x BIOS recovery jumper |
| Front I/O | 2 x USB 3.0, 1 x Power button with LED, 1 x ID button with LED, 1 x Reset button, 1 x NMI button, 1 x System status LED, 1 x HDD activity LED, 2 x LAN activity LEDs |
| Rear I/O | 2 x USB 3.0, 1 x VGA, 1 x COM (RJ-45 type), 2 x RJ-45, 1 x MLAN, 1 x ID button with LED |
| Backplane I/O | Front side_CBP20C3: 12 x SATA/SAS ports Rear side_CBP2020: 2 x SATA/SAS ports Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port |
| TPM | 1 x TPM header with LPC interface Optional TPM2.0 kit: CTM000 |
| Power Supply | 2 x 80 PLUS Platinum 1200W redundant PSUs AC Input: - 100-240V~/ 12-7A, 50-60Hz DC Input: - 240Vdc/ 6A DC Output: - Max 1000W/ 100-240V~ +12V/ 80.5A +12Vsb/ 3A - Max 1200W/ 200-240V~ or 240Vdc input +12V/ 97A +12Vsb/ 3A * Redundant function would be disabled if 2* GPU card are installed in system * To support redundant function, change power supply to 2000W when CPU TDP >165W |
| System Management |
Aspeed® AST2500 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) Dashboard JAVA Based Serial Over LAN HTML5 KVM Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.) Sensor Reading History Data FRU Information SEL Log in Linear Storage / Circular Storage Policy Hardware Inventory Fan Profile System Firewall Power Consumption Power Control LDAP / AD / RADIUS Support Backup & Restore Configuration Remote BIOS/BMC/CPLD Update Event Log Filter User Management Media Redirection Settings PAM Order Settings SSL Settings SMTP Settings |
| OS Compatibility |
For Cascade Lake processors: Windows Server 2012 R2 with Update Windows Server 2016 Windows Server 2019 Red Hat Enterprise Linux 7.6 (x64) or later Red Hat Enterprise Linux 8.0 (x64) or later SUSE Linux Enterprise Server 12.3 (x64) or later SUSE Linux Enterprise Server 15 (x64) or later Ubuntu 18.04 LTS (x64) or later VMware ESXi 6.0 Update3 or later VMware ESXi 6.5 Update2 or later VMware ESXi 6.7 Update1 or later Citrix Xenserver 7.1.0 CU2 or later Citrix Xenserver 7.5.0 or later Citrix Hypervisor 8.0.0 or later |
| Weight | 20 kg |
| System Fans | 4 x 80x80x38mm (16'300rpm), 2-ball |
| Operating Properties |
Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) NOTE: Please contact Technical Support for more information about optimized GPU operating temperature |
| Packaging Content |
1 x R281-3C2, 2 x CPU heatsinks, 1 x Rail kit, 2 x Non-Fabric CPU carrier |
| Part Numbers | Barebone package: 6NR2813C2MR-00 - Motherboard: 9MR91FS0NR-00 - Rail kit: 25HB2-3A0202-K0R - CPU heatsink: 25ST1-253100-F2R - Back plane board_12-port: 9CBP20C3NR-00 - Back plane board_2-port: 9CBP2020NR-00 - Front panel board: 9CFP2001NR-00 - 1200W power supply: 25EP0-212002-F3S - 1600W power supply: 25EP0-216007-L0S (as an option) - RJ45 type COM cable: 25CR0-200400-Y4R (as an option) |
| r281-3c2_datasheet_v1.pdf |
