Key Features
- Multi-Layered Security Ensures Data Authenticity and Privacy
- EAL5+ Certified Secure Element Hardware
- Native OSDP Secure Channel Functionality
- Trusted, Secure Authentication Using the S10 Data Model
- Supports iCLASS Elite™ and Corporate 1000 Programs
- Supports Mobile Communication via Bluetooth and NFC
- Integrates 125 kHz Credential Technology with Easy Migration
- Supports 15+ Common Credential Technologies
- Flush-Mount Terminal Block and Pigtail Wiring Options
- IP65-Rated, Rugged Outdoor Performance
- Easy, Secure Management via HID Reader Manager®
- Configurable via Mobile Device or OSDP
- Firmware Updates to Address Emerging Threats
- Personalized Setup via Configuration Card or Keypad
- Legacy Credential Technologies Can Be Disabled with Secure Migration
Specifications
| Keypad | Yes (3 x 4 Layout) |
|---|---|
| Dimensions (W x H x D) | 3.16" x 4.79" x 0.85" (80mm x 121.5mm x 21.5mm) |
| Product Weight | Pigtail 5.64oz (160g) / Terminal 4.94oz (140g) |
| Current Consumption | NSC4: 70 mA, Peak: 250 mA, Maximum Average: 80 mA, IPM5: 55 mA |
| Credential Compatibility (2.4 GHz Bluetooth) | Seos®-Enabled Mobile Credentials (HID Mobile Access) |
| Credential Compatibility (13.56 MHz NFC) | Seos, iCLASS SE®, iCLASS SR®, iCLASS®, MIFARE Classic, MIFARE DESFire EV1/EV2, Seos-Enabled Mobile Credentials (HID Mobile Access) |
| 125 kHz Credential Compatibility | HID Proximity®, Indala Proximity®, AWID Proximity, and EM Proximity |
| Typical Read Range | Seos®, MIFARE Classic, MIFARE DESFire EV1/EV2, and ISO14443A Single-Technology Cards – 1.6" to 4" (4 to 10 cm); HID/AWID Proximity®, Indala Proximity®, EM Proximity, and 125 kHz Single-Technology Cards – 2.4" to 4" (6 to 10 cm) |
| Installation | Suitable for Narrow Door Frames or Any Flat Surface; for Alternate Back Box Spacing, a Slotted Mounting Plate Can Be Used to Install Over and Cover a Single-Gang Switch Box |
| Color | Black Bezel with Silver Trim Plate |
| Operating Voltage | 12V DC |
| Device Inputs and Outputs | Input: Tri-Color LED, Beeper, Active-Low Hold; Output: Tamper Relay 0-60V DC, Max 100mA (Dry Contact) |
| Operating Temperature and Humidity | -31°F to +150°F (-35°C to +66°C); 0% to 95% Non-Condensing |
| Storage Temperature | -40°F to +185°F (-40°C to +85°C) |
| Environmental Rating | UL294 Indoor/Outdoor Rated, IP65 |
| Transmit Frequency | 125 kHz, 13.56 MHz, and 2.4 GHz |
| Communication and Panel Connection | Wiegand and RS-485 Half-Duplex (OSDP) via Pigtail (18 in/0.5 m) or Terminal Block |
| Device Management | HID Reader Manager / OSDP Configuration |
| Security Level | EAL5+ Certified Secure Element Hardware |
| Housing Material | Polycarbonate – UL94 V0 |
| Warranty | Limited Lifetime Warranty |
| UL Reference Number | 40K |
