Key Features
- Stainless Steel Barrier Arm Design for Enhanced Entrance Durability
- Stainless Steel Barrier Arm Design Suitable for All Types of Entrance Control
- Supports Integration with Card Swipe, QR Code, and Facial Recognition
- Anti-Tailgating and Anti-Passback Mechanism
- Opening Speed Adjustable to Requirements
- Auto-Reset Function
- Infrared Anti-Pinch and Obstruction Rebound Protection
- Supports Memory and Non-Memory Contact Modes
- Switchable Between Normally Open and Normally Closed Modes
- Supports Unidirectional or Bidirectional Passage Settings
- Made in Taiwan, Stable Operation
Specifications
| Unit Dimensions | 1400 × 160 × 980 mm |
|---|---|
| Barrier Panel Material | 10 mm Clear Acrylic |
| Door Panel Material | 8 mm Clear Acrylic or Stainless Steel Rod |
| Housing Material | 304 Brushed Stainless Steel (Top Cover 1.2 mm, Body 0.9 mm) |
| Lane Width | 600～900 mm |
| Barrier Panel Height | 820 mm |
| Barrier Panel Ground Clearance | 200 mm |
| Gate Type | Brushless Swing Gate |
| Power Specifications | 24V / 150W |
| Input Voltage | AC100V～240V，50/60Hz |
| Drive Motor | DC Brushless Motor, 90K, 40W |
| Passage Speed | Open Mode: 50 Persons/Minute; Normally Closed Mode: 35 Persons/Minute |
| Open/Close Speed | 0.5-1.5 Seconds (Adjustable) |
| Infrared Sensing | 6 Pairs |
| Indicator Light | RGB Tri-Color Light |
| Control System | Brushless Control System |
| Operating Noise | ≤ 65 dB |
| Operating Temperature | -20°C ～ +70°C |
| Operating Humidity | ≤ 90% (Non-Condensing) |
| Protection Rating | IP4X |
| Application Environment | Indoor, Outdoor (Canopy Recommended for Outdoor Use) |
