Key Features
- Functions as an Online Controller When Connected to the CU42E0 via BUS485.
- Functions as an Offline Controller When Not Connected to the Network.
- When Connected to the CU42E0, the Two Wall Reader Connections Can Be Configured for 2 Different Doors; When Offline and Configured via the PPD Portable Programming Device, One Reader Can Be Set for Entry and the Other for Lockdown.
- Antipassback Mode Can Be Used by Connecting 2 Wall Readers and Configuring One Door.
- Door and Tamper Monitoring via Contact Inputs (Intrusion Alarm and Door-Open Alarm).
- Access Updated via SALTO Virtual Network (SVN); Whitelists and Blacklists (User Card Revocation Lists) Are Transmitted via Data-on-Card Technology.
- Connects to the Ethernet Controller via BUS485.
- 4 Relay Outputs.
- 6 Inputs Connected to:
- Door Detection, Request-to-Exit (RTE) Switch, Office Switch.
- 2 Different Tamper Contacts:
- One Tamper Input.
- One Tamper Switch.
- Maximum Cable Length Between the Access Controller and Wall Reader Is Up to 400m.
- Connects to the Wall Reader Using a 4-Wire Twisted-Pair Cable.
- Power: 12V DC 400mA (Without SALTO Reader), Powered by an Adapter.
